With intuVision Parking, it is now possible to monitor and maintain control of parking spaces at all times:
intuVision VA Parking monitors the state of each spot in real-time to direct entering vehicles to empty spots or less full parking lots.
Daily metrics gained on the occupancy rates and other statistics enable efficient use of these public spaces.
Speeding vehicles in driveways and parking lots pose danger for pedestrians and other vehicles. intuVision VA detects and alerts personnel, in real time, of speeding vehicles, as well as vehicles driving the wrong-way down parking lanes and vehicles idling in driveways and blocking access.
intuVision VA Parking includes functionality for occupancy measures and metrics for parking facilities as well as floor-by-floor occupancy to better guide visitors. Occupancy counts can be viewed live in our Review Application, through our web API, or sent via email or other output triggers, depending on the constraints of your system.
intuVision occupancy requires only cameras mounted over ingress and egress points from the garage, and from this is able to obtain an accurate count of the number of vehicles in the facility or section, without the need for spot-based cameras or devices.
Occupancy measurements are available floor-by-floor, by section, and for the entirity of the parking facility or garage.
Contact intuVision directly to purchase our analytics solutions. To find a reseller in your region, contact us at email@example.com. Integrators and resellers contact us at firstname.lastname@example.org.
intuVision VA offers the unique capability to add as many events and event rules to each of your cameras - meaning that with the same camera you can both detect open parking places, secure your facility, and ticket vehicles parking over-long.
|Activity||Detect any moving object activity in a zone, can be limited to people, vehicular, or other activity.|
|Camera Tamper||Detect when a camera has been obscured or blocked, either unintentionally or maliciously.|
|Color Search||Perform a color based search of vehicles or people in the parking area - quickly finding objects of interest.|
|Enter/Exit||Detect vehicles as they enter or exit the parking lot - notifying employees to assist customers, generating counts, or detecting after hours intrusion.|
|Heatmap||Generate a heatmap of paths taken throughout parking lot to determine vehicle flow.|
|Idle Object||Detect vehicles or people idling and loitering in specific areas.|
|Loading Zone||Detect when cars park in loading zones. Use classification to alarm only on cars, while trucks don't generate the alarm. Alternatively, alarm if a vehicle has been at the loading zone for longer than the allowed time.|
|Multi-Camera Lot Map||Review parking space information from all cameras on one lot-map. Know at a glance where to direct new vehicles and who has parked over-long.|
|No Exit||Detect if a car has parked and no one has left the vehicle. This is useful to detect suspicious activity.|
|No Parking Zone||Generate an alarm if a vehicle has parked in a no parking zone.|
|Park Duration||Generate an alarm if a vehicle has been parked in a spot for longer than the allocated duration.|
|Parking Lot Occupancy||Collect information about parking spaces, including which are currently open, full, percentage use over time, etc.|
|Smoke/Fire Detection||Visually detect if a fire has occurred in your parking areas. Standard smoke and fire detectors do not work well outdoors, our visual detector will notify you right away.|
|Speeding Vehicle||Detect vehicles speeding through parking areas. Speeding vehicles are unsafe, but can be hard to catch in private or public parking lots.|
|Stopped Vehicle||Detect vehicles stopped in driving lanes. Quickly be alerted to possible problems or suspicious behavior|
|Throughput||Detect objects crossing specified edges of the zone.|
|Wrong Way||Detect vehicles going against the flow of traffic.|
|Zone Intrusion||Detect when moving objects enter into a zone of interest.|
intuVision VA Parking module was used in an office building parking lot detecting parking spot availability in an all-day test; with 180 parking/leaving events an unprecedented 98% accuracy was achieved.
In a typical office building parking lot, drivers have to roam around looking for empty spots near their entrance. The building management were looking for ways to direct drivers to available spots for both efficiency and safety reasons.
During a live testing of intuVision VA system performance in a commercial building parking lot, spots that become available were accurately detected and reported in a timely fashion.
Knowing where the available spots are cuts down the time spent by the employees leading to increased efficiency as well as reduced traffic in the parking lot. In addition intuVision Parking module was set to detect violations and alarm when vehicles stop in no parking or fire zones.
In this use case, cameras viewing the parking lot were mounted on the building approximately at 35ft. height looking down on the sections of the lot covering 25-35 parking spots as seen in the example.
Each park row and spot can be uniquely labeled and the parking lot plan feature allows mapping of each spot to corresponding location on the parking lot plan.
The API provided with intuVision VA facilitates visual display of open spots as well as percentage availability by time of day. With this metric, parking lot utilization rates can be calculated leading to efficient use of all parking spaces. In this use case addition to reporting spot availability intuVision Parking module is configured to monitor No-Parking Zones and speeding vehicles in the driveways to generate alarms upon violation of those.
To measure the spot availability detection performance, 35 spots in one section of the lot were used. During the eight hours starting around 7:30 am, 179 vehicle parking and leaving events were observed as the ground truth.
During this 8 hour period intuVision VA has successfully detected 170 of these events resulting in the following accuracy and precision and F1-score metrics:
intuVision VA Parking module performed with 98% accuracy monitoring parking spot availability in this parking lot scenario.
In addition intuVision Parking module also detected and reported parking violations and alarmed when vehicles stopped in no parking or fire zones.
intuVision VA Parking Spy - An example of use of intuVision's Parking Spy, used to monitor 24 parking spaces in a large lot. Notice at the end when the final parking space is filled, the number turns red to indicate it is full. Additional capability included to alarm only after a vehicle has been parked for a set duration.
intuVision Parking Overview - Many more intuVision Parking events are available, and with our unique event set-up, you can add as many events as needed to each camera.